WhatsApp us
Hadley metal C stud for drywall partitions

Hadley Metal Studs Next Day Delivery London / Inside the M25

Hadley metal systems are the galvanised steel sections used to build drywall partitions, wall linings and MF plasterboard ceilings. We stock the studs, track, MF bars and lining sections, sold in packs, with prices shown ex VAT.

For Hadley metal systems only, we offer next-day delivery inside the M25 when the order is placed before 12 noon, Monday to Friday. There are no Saturday deliveries. This does not apply to other products, or to addresses outside the M25.

Need a quantity check? Use our free drywall partition calculator. It uses the products we sell, prices the list live, and you can add it to your basket. Results are estimates — call 03330 908479 if you want us to check your sizes.

Quick answer

  • Next-day delivery inside the M25 on Hadley metal systems when you order before 12 noon, Monday to Friday. No Saturday deliveries.
  • Examples: order Thursday before 12 noon, delivered Friday; order Friday before 12 noon, delivered Monday; order Monday before 12 noon, delivered Tuesday.
  • The £400 ex VAT minimum still applies, with free delivery in England, including inside the M25.
  • Subject to stock. If an item is not available for the next day, or your site is outside the M25, we will agree a delivery day with you as usual.

What Hadley metal systems are

Hadley sections are lightweight galvanised steel, made for internal drylining. The same family of parts covers partitions, linings and MF ceilings, so you can order the metal for a room, a fit-out or a floor of walls from one range. Browse the full list in our Hadley drylining collection.

Partitions: C studs, I studs and track

A metal stud wall is a frame of vertical studs sat in floor and ceiling track, then boarded both sides. Hadley C studs come in 50, 60, 70, 92 and 146mm widths. Track is 2mm wider than the stud so the studs slot in — so 70mm studs take 72mm track, 50mm studs take 52mm track, and so on.

Standard track (25mm leg) is the usual floor and head channel. Deep track (50mm leg) is used at the head where the system needs a deflection allowance, for example under a concrete slab or on a taller wall.

I studs are stiffer than C studs and are used for taller walls, or where a specification calls for them. Lengths vary by size: C studs are typically offered from 2.4m up to 4.2m, with longer lengths on the wider sections. Pick the shortest length that is at least your floor-to-ceiling height.

Studs are usually set at 600mm centres so a 1200mm-wide plasterboard sheet lands on a stud at each edge. Some specifications, or tiled finishes, call for 400mm centres. Our metal stud partition guide walks through the build-up, centres and a worked example.

What to order for a partition

  • C studs (or I studs, if specified) in a length that covers the wall height, in packs of 10.
  • Matching track for the floor and ceiling, in 3m lengths, packs of 10. Use deep track at the head if the system asks for it.
  • Plasterboard, drywall screws and, for sound, acoustic roll in the cavity. See how to soundproof a stud wall if the wall needs a better acoustic performance.

At the time of writing (18 November 2026), a pack of 10 Hadley 70mm C studs starts at £28.52 ex VAT for the 2.4m length (£35.64 for 3.0m, £42.77 for 3.6m). The matching 72mm track, pack of 10 × 3m, is £30.30 ex VAT. The 72mm deep track is £43.67 ex VAT for the same pack size.

MF ceilings

An MF ceiling is a suspended plasterboard ceiling on a lightweight steel grid. The usual Hadley parts are:

You will also need hangers or soffit brackets, wafer-head or jack-point screws, and the plasterboard itself. See the full MF ceiling system collection and our MF ceiling components guide for spacings and how the grid goes together.

Wall linings

To line an existing wall, Hadley Gypliner GL1 studs and GL8 track form a shallow metal lining. GL1 studs are sold in 2.4m, 2.7m, 3.0m and 3.6m packs of 10 (from £21.01 ex VAT for the 2.4m pack). GL8 track is £17.68 ex VAT for a pack of 10 × 3m. This is the metal only; you still need the board, screws and any insulation behind the lining.

Other Hadley sections

Resilient bar (£28.57 ex VAT for 10 × 3m) is used to help decouple plasterboard from the studs for sound. 70mm fixing plates (£23.74 ex VAT for 10 × 3m) and galvanised angle cover general fixing and perimeter work. For heavier infill or structural framing, we also stock Hadley SFS steel framing (C studs and U tracks in thicker gauges). SFS is a different system from a standard internal partition, so check the specification before you mix the two.

Next-day delivery inside the M25

This next-day service is for Hadley metal systems going to a site inside the M25. Order before 12 noon, Monday to Friday, and we aim to deliver the next working day, subject to stock. There are no Saturday deliveries.

  • Order Monday before 12 noon — delivered Tuesday.
  • Order Thursday before 12 noon — delivered Friday.
  • Order Friday before 12 noon — delivered Monday.

If you order after 12 noon, it counts towards the next working day's cut-off. So an order placed at 2pm on Thursday is treated like a Friday morning order and, if it qualifies, is delivered on Monday, not Friday.

Our office hours are Monday to Thursday 8am–5pm and Friday 8am–12pm, which is also the Friday cut-off, so a Friday order needs to be in before 12 noon. If a bank holiday falls on the next working day, delivery moves to the following working day. Put a note on the order if you need the next-day service, or call us on 03330 908479 before 12 noon so we can confirm stock and access.

This exception does not cover insulation, plasterboard or other ranges, and it does not cover addresses outside the M25. For those orders we agree a delivery day in the usual way. See our London delivery page for access notes, and the shipping policy for the general delivery rules.

Minimum order and how delivery works

Hadley metal systems are part of our drylining range. The minimum order is £400 ex VAT, with free delivery in England, including London and other addresses inside the M25. We have not set a different Hadley minimum or a separate next-day charge.

We are delivery only — there is no collection. Materials are delivered by Moffett lorry (truck-mounted forklift) and offloaded at your site. Someone must be there to receive the load, and we need a contact number for the driver. Tell us about tight access, parking restrictions or controlled zones when you order, especially on inner London streets.

Frequently asked questions

Do you offer next-day delivery on Hadley metal systems in London?

Yes, inside the M25, when you order before 12 noon, Monday to Friday, subject to stock. There are no Saturday deliveries.

What if my site is just outside the M25?

The next-day service is for addresses inside the M25 only. Outside that area we still deliver Hadley metal systems across England, with the £400 ex VAT minimum and free delivery, and we will agree a delivery day with you.

Can I get next-day delivery on plasterboard or insulation as well?

Not as part of this service. The next-day cut-off applies to Hadley metal systems inside the M25 only. If your order also includes other products, call us before you order and we will tell you what timing we can offer.

Is there a minimum order?

Yes. The minimum is £400 ex VAT, with free delivery in England. Prices on the site are ex VAT; VAT is added at checkout.

Can I buy single lengths?

No. Hadley studs, track, MF sections, angle and accessories are sold in packs of 10 lengths. The calculator rounds up to whole packs, and spare lengths are useful for noggings and openings.

Can I collect?

No. We are online and delivery only, with no collection.

Order Hadley metal systems

Start with the Hadley drylining collection, or go straight to metal studs and track, the MF ceiling system, Gypliner wall lining or SFS steel framing. Use the drywall partition calculator to build a list, then add it to your basket.

Prices in this guide are ex VAT and were correct at the time of writing (18 November 2026). Call 03330 908479 (Monday to Thursday 8am–5pm, Friday 8am–12pm) or email sales@insulationwarehousedirect.co.uk if you want us to check a list or confirm next-day availability inside the M25.

Back to blog