How Much Plasterboard, Insulation and Screws Do I Need?
We have been asking our Facebook followers what they always seem to run short of on a job: screws, plasterboard, insulation or something else. Whatever the answer, the cause is usually the same. Quantities get guessed from memory, waste is forgotten and the small items get left off the list. Here is a simple way to work out how much plasterboard, insulation, metal and screws you need, with a worked example.
Need a quick quantity or thickness check? Use our free plasterboard calculator. It uses the products we sell, prices the list live, and you can add it to your basket. Results are estimates — call 03330 908479 if you want us to check your sizes.
Plasterboard
A standard 2400 × 1200mm sheet covers 2.88m².
- Work out the area of each wall or ceiling (length × height, or length × width), then subtract large openings such as doors and windows.
- Multiply by the number of faces and layers. A partition boarded both sides needs twice the area, and a double-layer lining needs twice again.
- Add around 10% for cutting and waste.
- Divide by 2.88 and round up.
Pick a board length that suits the wall height. A 2.7m wall boarded with 2.7m sheets avoids horizontal joints and saves both boards and filling. Choose the right board for the room too: moisture resistant for kitchens and bathrooms, and fire or sound boards where the specification calls for them. Browse our plasterboard range.
Screws
At 300mm centres into studs at 600mm centres, a 2400 × 1200mm wall board takes about 27 screws. Ceilings (230mm centres, 150mm at board ends) and walls with studs at 400mm centres take more. Multiply by your board count and round up to whole boxes or cartons. Use a screw at least 10mm longer than the board for metal framing, or 25mm longer for timber. Our Evolution drywall screws are sold in full cartons.
Insulation
- PIR boards: area ÷ 2.88m² per sheet. When you are cutting strips to fit between joists, rafters or studs, allow 10–15% extra, as offcuts are not always usable.
- Rolls and slabs: area ÷ the coverage shown on the product, for each layer. For example, Rockwool RWA45 100mm acoustic slab comes in 2.88m² packs, while the 50mm version covers 6.48m² per pack.
- Two-layer loft insulation needs two calculations: one for the layer between the joists and one for the layer across them.
Metal studs and track
- Studs: wall length ÷ stud centres, rounded up, plus one so there is a stud at each end. Add two extra per door opening.
- Track: twice the wall length (floor and ceiling), cut from 3m lengths.
- Studs and track come in packs of 10 lengths, so spares are handy for noggings and openings.
Worked example: a 4m partition
A new 4m long, 2.4m high metal stud partition with 70mm studs at 600mm centres, one layer of 12.5mm board each side and acoustic insulation in the cavity:
| Item | Sum | Order |
|---|---|---|
| C studs, 2.4m | 4000 ÷ 600 = 6.7, round up to 7, plus 1 | 8 studs (1 pack of 10) |
| Track, 3m lengths | 2 × 4m = 8m | 3 lengths (1 pack of 10) |
| Plasterboard | 4 × 2.4 × 2 sides = 19.2m², +10% = 21.1m², ÷ 2.88 | 8 sheets |
| Screws | 8 boards × 27 | About 220 |
| Acoustic insulation | 9.6m² + 10% = 10.6m² | 2 packs of 50mm RWA45 (6.48m² each) |
Our free drywall partition calculator does this for you, including door openings, and the MF ceiling calculator does the same for suspended ceilings. For insulation thickness, use our PIR U-value calculator.
The things that get forgotten
- Jointing tape, filler and angle beads for external corners. See beads, tapes and fillers.
- Foil tape for PIR joints, and expanding foam for small gaps.
- Fixings for track and perimeter channel into masonry or concrete.
- Extra studs, noggings or timber for doors, wall-hung basins, radiators and kitchen units.
- A spare sheet or two for mistakes and damaged corners.
Getting the quantities right is half the job. Our guide to common insulation installation mistakes covers the other half.
Order everything on one delivery
Putting the whole job on one order means one delivery and nothing left waiting. We deliver across England, mainland Wales and mainland Scotland. See our delivery information for details. Send us your list and we will check it over. Call 03330 908479, email sales@insulationwarehousedirect.co.uk, or order online.
