WhatsApp us
British Gypsum Thistle MultiFinish plaster 25kg bag

How Many Bags of Plaster and Sheets of Plasterboard Do I Need? Worked Examples

Ordering plaster is a bit like ordering pizza for a stag do: get it wrong one way and you're stuck, get it wrong the other and there's a pile left over going hard. This guide gives you the simple sums for British Gypsum plaster and plasterboard, with four worked examples you can copy. If you'd rather let a computer do it, our free plasterboard calculator and calculators hub will do the counting.

Quick answer

  • Finish plaster (skim): one 25kg bag of Thistle MultiFinish or Thistle BoardFinish covers about 10m² at 2mm. Bags = area ÷ 10, then add 10%.
  • Undercoat: one bag of Thistle HardWall covers about 3m² at 11mm; Thistle BondingCoat about 2.75m². Bags = area ÷ coverage, then add 10%.
  • Plasterboard: a 2400 × 1200mm sheet covers 2.88m². Sheets = area ÷ 2.88, then add about 10% for cuts.
  • Always round up to a whole bag or sheet. Nobody has ever sold half a bag of plaster on purpose.

Plaster coverage per 25kg bag

These are British Gypsum's own coverage figures. Real walls are rarely perfect, so we add 10% for waste, splashes and the bit that ends up on your boots.

Product (25kg bag) What it's for Thickness Coverage per bag
Thistle MultiFinish Finish coat on plasterboard or undercoat 2mm about 10m²
Thistle BoardFinish Finish coat on plasterboard 2mm about 10m²
Thistle BondingCoat Undercoat on smooth, low-suction walls 11mm (8mm ceilings) about 2.75m² at 11mm, 3.5m² at 8mm
Thistle HardWall Undercoat on brick and block 11mm (8mm ceilings) about 3m² at 11mm

If you're skimming old, uneven walls, you'll often end up nearer 3mm than 2mm. At 3mm a bag covers about 6.7m², so allow roughly half as many bags again.

Step 1: measure the area

For walls, add up the lengths of the walls you're doing and multiply by the height. Take off big openings like doors (about 1.6m² each) and windows (width × height). For a ceiling, it's just length × width. Our guide to working out plasterboard, insulation and screws has more measuring tips.

Worked example 1: re-skim a bedroom

Room 3.5m × 3.0m, 2.4m high, one door and one 1.2 × 1.2m window. Walls and ceiling both being skimmed.

  • Walls: (3.5 + 3.0 + 3.5 + 3.0) × 2.4 = 31.2m²
  • Less door 1.6m² and window 1.44m² = 28.2m²
  • Ceiling: 3.5 × 3.0 = 10.5m²
  • Total: 38.7m² ÷ 10 = 3.9 bags, plus 10% = 4.3, so 5 bags of Thistle MultiFinish

MultiFinish is the safer pick on old walls because it suits a wider mix of backgrounds. If the walls are rough and you'll be nearer 3mm, order 7. Old plaster that's painted or very dry needs a bonding agent such as Thistle Bond-It first.

Worked example 2: new stud wall, boarded both sides

A new partition 4.0m long and 2.4m high, boarded and skimmed on both faces.

Counting by width like this is often more accurate than area ÷ 2.88 on walls, because the offcut from the last sheet rarely gets used. For the metal studs and track, the partition calculator has you covered.

Worked example 3: a 4 × 4m ceiling

Ceiling 4.0m × 4.0m = 16m².

  • Sheets: 16 ÷ 2.88 = 5.6, plus 10% = 6.1, so 7 sheets of 12.5mm board
  • Plaster: 16 ÷ 10 = 1.6, plus 10% = 1.8, so 2 bags of Thistle BoardFinish

Ceiling boards are heavy and awkward. A board lifter or a willing friend is strongly recommended. An unwilling friend will do at a push.

Worked example 4: float and set a brick wall

Bare brick wall 4.0m × 2.4m = 9.6m², plastered from scratch with an undercoat and a finish coat.

  • Undercoat: 9.6 ÷ 3 = 3.2, plus 10% = 3.5, so 4 bags of Thistle HardWall at 11mm
  • Finish: 9.6 ÷ 10 = 1, plus 10% = 1.06, so 2 bags of Thistle MultiFinish (MultiFinish, not BoardFinish, goes over an undercoat)

On a smooth, low-suction wall such as dense concrete block or engineering brick, swap HardWall for Thistle BondingCoat: 9.6 ÷ 2.75 = 3.5, plus 10% = 3.8, so 4 bags. Not sure which undercoat you need? Read what bonding plaster is for and our MultiFinish vs BoardFinish vs Bonding guide.

All four examples at a glance

Job Area Plasterboard Plaster
Re-skim a bedroom (walls + ceiling) about 39m² none 5 bags MultiFinish (7 if the walls are rough)
New stud wall, boarded and skimmed both sides 19.2m² 8 sheets 2400 × 1200 3 bags BoardFinish
Board and skim a 4 × 4m ceiling 16m² 7 sheets 2400 × 1200 2 bags BoardFinish
Float and set a brick wall 9.6m² none 4 bags HardWall + 2 bags MultiFinish

Hitting the £400 delivery minimum

One room rarely gets to £400 ex VAT on its own. Most customers bundle a whole floor, or add the boards, beads, Gyproc DriWall Adhesive, screws and insulation in one go. You can mix anything from our British Gypsum range with the rest of the site to reach the minimum. Current British Gypsum prices are in our post on British Gypsum WallBoard and Thistle plaster prices.

One warning: plaster has a shelf life of about four months, so don't stockpile it like it's toilet roll in 2020. Order what the job needs, store it dry and off the floor, and use the oldest bags first.

Delivery

Insulation Warehouse Direct is online and delivery only. We don't do collections from a yard, and we don't provide PDF quotes or export.

England: free delivery on orders from £400 ex VAT.
Mainland Wales and mainland Scotland: British Gypsum (plus Celotex, Knauf, ceilings and access panels) can go there too, with a £400 ex VAT minimum plus £40 + VAT delivery. We can't deliver to Northern Ireland or the Scottish islands.

We confirm your delivery date when we process the order. Questions? Call 03330 908479 or contact us. Full details: delivery information.

Frequently asked questions

How many bags of plaster do I need per m²?

For a 2mm skim, about 0.1 bags per m² (one 25kg bag of MultiFinish or BoardFinish covers about 10m²). For an 11mm HardWall undercoat, about 0.33 bags per m². Add 10% for waste.

How many sheets of plasterboard for a room?

Work out the area, divide by 2.88 for 2400 × 1200mm sheets and add about 10%. For walls, counting sheets by wall width (wall length ÷ 1.2m, rounded up) is often more accurate.

How much plaster to skim a ceiling?

Ceiling area ÷ 10 = bags at 2mm, plus 10%. A 4 × 4m ceiling takes 2 bags.

Can I use BoardFinish over HardWall?

No. Use MultiFinish over an undercoat like HardWall or BondingCoat. BoardFinish is for low-suction backgrounds like plasterboard.

Do you deliver plaster to Scotland and Wales?

Yes, British Gypsum goes to mainland Wales and mainland Scotland with a £400 ex VAT minimum plus £40 + VAT delivery. We can't deliver to Northern Ireland or the Scottish islands.

Ready to order? Shop the British Gypsum plaster and adhesive, plasterboard and the wider British Gypsum range, or run your room through the plasterboard calculator. Prices on our site are ex VAT, with VAT added at checkout. Need a hand with quantities? Call 03330 908479. Company: Bay Drywall and Insulation Supplies Ltd (company no. 14473556), Unit 3 Babbage Court, Totnes Industrial Estate, Totnes, Devon TQ9 5JE.

Sources: British Gypsum Thistle MultiFinish product data sheet; British Gypsum product data sheets. Figures and recommendations here are general guidance, correct at the time of writing. They are not a substitute for a calculation by your designer or the manufacturer's technical team, and Building Control has the final say on regulated work.

Back to blog