Plastic Access Panel Sizes Guide
Quick answer: Choose a plastic access panel by the clear opening you need once it is installed, then cut a structural opening 5mm larger than the panel size. Our UK-made plastic access panels come in six stock sizes, from 150 × 150mm to 550 × 550mm. They are not fire rated, and they are not made to custom sizes.
See every size in the plastic access panels collection. If you need a fire-rated or made-to-measure hatch, use FlipFix metal access panels instead. For the wider metal and plasterboard-faced range, see access panels.
Plastic access panel size chart
The figures below are from the manufacturer’s datasheet. Panel size is the size you order. The structural opening is the hole to cut. The clear opening is the space you can reach through once the panel is in place.
| Panel size | Product | SKU | Structural opening | Overall size (inc. frame) | Frame width | Clear opening once installed | Depth | Weight |
|---|---|---|---|---|---|---|---|---|
| 150 × 150mm | 150x150 plastic access panel | HA150X150 | 155 × 155mm | 196 × 196mm | 25mm | 120 × 140mm | 16mm | 0.18kg |
| 300 × 300mm | 300x300 plastic access panel | HA300X300 | 305 × 305mm | 345 × 345mm | 25mm | 293 × 294mm | 16mm | 0.47kg |
| 350 × 350mm | 350x350 plastic access panel | HA350X350 | 355 × 355mm | 417 × 417mm | 30mm | 343 × 344mm | 16mm | 0.75kg |
| 400 × 400mm | 400x400 plastic access panel | HA400X400 | 405 × 405mm | 467 × 467mm | 30mm | 370 × 394mm | 16mm | 1.03kg |
| 450 × 450mm | 450x450 plastic access panel | HA450X450 | 455 × 455mm | 512 × 512mm | 30mm | 420 × 440mm | 16mm | 1.13kg |
| 550 × 550mm | 550x550 plastic access panel | HA550X550 | 555 × 555mm | 621 × 621mm | 35mm | 532 × 518mm | 16mm | 1.6kg |
How to choose a plastic access panel size
- Measure the space you need to work in. The clear opening is smaller than the panel size because of the frame and door. Use the clear opening column, not just the panel size, when you are planning to get a hand or a tool through the hatch.
- Check what you can cut. The structural opening is always 5mm larger than the panel in both directions. Make sure there is a clear, square area of plasterboard or lining, and that you will not cut into services, noggins or studs you need to keep.
- Allow for the picture frame. The overall size including the frame is larger than the panel. Check there is enough flat surface around the opening for the frame to sit flush.
- Stay within stock sizes. This plastic range is not made to custom sizes. If your opening is non-standard, see FlipFix metal access panels, which can be made to order.
If you are comparing plastic with metal, or deciding whether a fire rating is required, read plastic vs metal access panels. For the FlipFix metal size range, see our access panel sizes UK guide.
Fitting the size you choose
Once you have picked a size, cut a square, level opening to the structural dimension in the table, apply multi-purpose silicone to the groove on the back of the frame, and push the panel in with the hinge on the correct side. Full steps are in how to fit a plastic access panel in plasterboard.
These panels are for walls and ceilings in unheated voids, and they are not fire rated. For a fire-resisting wall or ceiling, use a 1 hour or 2 hour fire rated metal access panel.
Frequently asked questions
What opening do I cut for a 300x300 plastic access panel?
Cut 305 × 305mm. That is 5mm larger than the 300 × 300mm panel. Once installed, the clear opening is 293 × 294mm.
Why is the clear opening smaller than the panel size?
The picture frame and hinged door take up some of the opening. The datasheet lists the clear opening for each size, and that is the space you can actually use.
Do you do other plastic access panel sizes?
We stock six plastic sizes, from 150 × 150mm to 550 × 550mm. We do not offer custom plastic sizes. For another dimension, use a FlipFix metal panel, including bespoke sizes made to order.
Need help matching a size to the job? Call 03330 908479.
