Plastic vs Metal Access Panels: Which Do You Need?
Quick answer: Use a plastic access panel for a low-cost, lightweight, paint-ready hatch in an unheated wall or ceiling void, where fire rating is not required. Use a metal access panel when you need a fire rating, a lockable metal door, or a made-to-measure size. Plastic panels in our range are not fire rated.
Browse plastic access panels from 150 × 150mm to 550 × 550mm, or the full access panels range, including FlipFix metal and plasterboard-faced panels. If you are insulating a loft rather than opening a wall or ceiling for pipes, see our loft ladders and loft insulation.
Plastic vs metal access panels at a glance
| Plastic access panel | Metal access panel (FlipFix) | |
|---|---|---|
| Material | High-impact UV-stable white HIPS plastic | Metal faced door and steel picture frame, or a plasterboard-faced beaded frame |
| Fire rating | Not fire rated | Non fire rated, 1 hour, or 2 hour depending on the panel |
| Where it is for | Walls and ceilings; unheated voids | Walls and ceilings, including fire-resisting constructions when you choose a fire-rated model |
| How it fits | Push-fit into a pre-cut opening, with multi-purpose silicone in the groove on the back of the frame | FlipFix fitting devices clamp to the back of the plasterboard; no bracing, screws or glue |
| Door | Hinged picture-frame door with a snap-friction catch, released with a coin once the adhesive has dried | Lockable door (flush T-key lock on metal faced panels; budget lock on plasterboard-faced panels) |
| Finish | White, finely textured, will accept a paint finish | Metal faced: RAL 9010 white. Plasterboard faced: plaster in and decorate |
| Sizes | Stock sizes 150 × 150mm to 550 × 550mm only; not made to custom sizes | Stock sizes from 150 × 150mm up to 1200 × 600mm depending on the panel; bespoke sizes made to order |
| Ceiling use | Yes; the manufacturer guarantees the plastic range will not sag when fitted in a ceiling | Yes; suitable for walls and ceilings |
The points above are taken from the manufacturer datasheets and fitting instructions for the plastic HA range and for FlipFix panels we sell. See also beaded frame vs picture frame access panels and fire rated access panels explained.
When a plastic access panel is the right choice
Choose plastic when you need a compact inspection hatch to reach services behind a plasterboard wall or ceiling, the opening is not in a fire-resisting construction, and you want a light, paint-ready door. The plastic panels we sell are UK-made, hinged, and push into an opening that is 5mm larger than the panel size. Typical jobs include access to valves, stopcocks, or cable junctions in an unheated void.
Start with the size you need, for example a 150x150 plastic access panel for a small inspection opening, or a 300x300 plastic access panel when you need a larger clear opening. All six sizes are listed in our plastic access panel sizes guide.
When you need a metal or fire-rated access panel
Do not use a plastic access panel where the wall or ceiling must resist fire. In that case use a 1 hour fire rated metal access panel or a 2 hour fire rated metal access panel. Check the rating your wall or ceiling specification requires before you order.
Metal is also the better route if you need a lockable door, a plasterboard-faced panel that can be plastered in, or a size the plastic range does not cover. FlipFix metal faced non fire rated panels go up to 1200 × 600mm, and bespoke sizes can be made to order – call us on 03330 908479.
Fitting differences
A plastic access panel is pushed into a square, level opening after you apply silicone to the frame. When the adhesive has dried, the snap-friction door opens with a coin. Step-by-step instructions are in how to fit a plastic access panel in plasterboard.
A FlipFix metal or plasterboard-faced panel uses the FlipFix fitting devices instead of silicone. The manufacturer’s instructions are to cut the opening 5mm larger than the panel, place the frame in, and screw in the devices on a low torque setting until they grip the back of the plasterboard. See how to install an access panel in plasterboard for the FlipFix method.
Frequently asked questions
Are plastic access panels fire rated?
No. The plastic access panels we sell are not fire rated. Use a FlipFix 1 hour or 2 hour fire rated metal panel where a fire-resisting hatch is required.
Can I paint a plastic access panel?
Yes. The white HIPS door has a finely textured surface that will accept a paint finish.
Can I use a plastic access panel in a ceiling?
Yes, in an unheated void. The manufacturer guarantees all sizes in this plastic range will not sag when fitted in a ceiling.
Need help choosing? Call 03330 908479, or start with the plastic access panels collection.
