Insulation & Building Guides
MF Ceiling Components Explained: MF5 Top Hat, M...
What an MF (metal furring) suspended plasterboard ceiling is, what MF5, MF6A and MF7 do, the typical build-up and spacings from the Alpha MF Ceiling installation guide, fire-rated options, where...
MF Ceiling Components Explained: MF5 Top Hat, M...
What an MF (metal furring) suspended plasterboard ceiling is, what MF5, MF6A and MF7 do, the typical build-up and spacings from the Alpha MF Ceiling installation guide, fire-rated options, where...
Multi Finish vs Board Finish vs Bonding Plaster...
Finish plasters go on last at 2mm, undercoats level the wall first, and the background decides which you need. We compare Thistle MultiFinish, BoardFinish, BondingCoat and HardWall using British Gypsum...
Multi Finish vs Board Finish vs Bonding Plaster...
Finish plasters go on last at 2mm, undercoats level the wall first, and the background decides which you need. We compare Thistle MultiFinish, BoardFinish, BondingCoat and HardWall using British Gypsum...
How to Insulate a Shed or Garage: Walls, Roof a...
Multifoil is quick and thin, PIR boards give the most insulation for the money, and a floating floor over PIR or EPS finishes the job. Here is how to insulate...
How to Insulate a Shed or Garage: Walls, Roof a...
Multifoil is quick and thin, PIR boards give the most insulation for the money, and a floating floor over PIR or EPS finishes the job. Here is how to insulate...
Fire Rated Insulation Explained: Non-Combustibl...
Reaction to fire (Euroclass A1 to F) belongs to a material, while fire resistance in minutes belongs to a tested system. This guide explains both and lists the published fire...
Fire Rated Insulation Explained: Non-Combustibl...
Reaction to fire (Euroclass A1 to F) belongs to a material, while fire resistance in minutes belongs to a tested system. This guide explains both and lists the published fire...
What Is the U-Value of 100mm PIR Insulation?
100mm PIR at λ 0.022 W/mK has an R-value of 4.50 m²K/W, and typically gives U-values of about 0.12 to 0.20 W/m²K depending on the construction. Here are the published...
What Is the U-Value of 100mm PIR Insulation?
100mm PIR at λ 0.022 W/mK has an R-value of 4.50 m²K/W, and typically gives U-values of about 0.12 to 0.20 W/m²K depending on the construction. Here are the published...
How to Install Insulated Plasterboard on Batten...
Step-by-step guidance for mechanically fixing insulated plasterboard to timber battens, stud walls, metal wall-lining systems and ceilings, based on Kingspan K118 installation guidance.
How to Install Insulated Plasterboard on Batten...
Step-by-step guidance for mechanically fixing insulated plasterboard to timber battens, stud walls, metal wall-lining systems and ceilings, based on Kingspan K118 installation guidance.